Need to bring back your Holosun EPS Carry Red Dot back to its default settings? A simple factory reset can solve a range of troubles. Here's how to perform a thorough factory reset on your Holosun EPS Carry:
* First, locate the tiny reset switch on the bottom of your sight.
* Use a small object like a matchstick to push and sustain the reset switch for about 10 seconds.
* You'll certainly see a short blink on the screen to signal that the reset is achieved.
* Release the reset switch and your Holosun EPS Carry should now be back to its original settings.
Resetting Your Holosun EPS Carry to Default Settings
Sometimes your Holosun EPS Carry may need a little recalibration. This can occur if you've made some modifications and want to return to the factory settings. Thankfully, it's a pretty straightforward procedure. First, locate the small button on the rear of your sight. This is the reset button. Next, use a small object like a pen or paperclip to gently activate the switch. Hold it down for approximately 5 seconds until you see the display change. Release the switch and your Holosun EPS Carry will now be back at its factory defaults.
Factory Reset for the Holosun EPS Carry Red Dot Sight
Performing a factory reset on your Holosun EPS Carry is a straightforward process that will reinitialize it to its original settings. This can read more be helpful if you've made some changes to the sight's configuration and want to revert or if you're experiencing any malfunctions.
To factory reset your Holosun EPS Carry, first ensure that the red dot is powered on. Then, press and maintain both the setting button and the power button simultaneously for approximately 5 seconds. You will know that the reset has been successful when the red dot blinks rapidly or you hear a confirmation sound.
Once the reset is complete, your Holosun EPS Carry will be back to its factory defaults. This means all custom settings, such as brightness levels and reticle patterns, will have been removed. You will then need to reprogram the sight according to your preferences.
Get Back to Basics: Holosun EPS Carry Red Dot Reset
A solid control on your firearm is paramount, and a reliable red dot sight will significantly improve their accuracy. The Holosun EPS Carry series stands out for its robust build and user-friendly design. However, even the most dependable sights can sometimes become misaligned. This guide will walk you through the straightforward process of resetting your Holosun EPS Carry red dot, ensuring it's precisely aligned for optimal performance.
- Before you begin, ensure your firearm is unloaded and safe.
- Locate the reset button on the sight housing. It's typically a small switch
- Engage the reset button firmly while simultaneously adjusting the windage or elevation knobs to re-zero the sight
- After resetting, meticulously test your sight at various ranges.
With a few simple steps and attention to detail, you can keep your Holosun EPS Carry red dot functioning flawlessly. Remember, regular maintenance and calibration are essential for maximizing the accuracy and reliability of any firearm optic.
Revert Your Holosun EPS Carry to Factory Settings
Restoring your Red Dot sight to factory settings is a simple process that can be useful in various situations. If you're experiencing glitches with your EPS Carry or simply want to clear all user-configured settings, following these steps will guide you through the procedure. First, identify the reset button on the side of your sight. It's usually a small switch. Next, use a pen to depress the reset button and hold it down for a few moments. You should see a blinking LED indicator, which signifies that the reset is in progress. Release the button and your EPS Carry will restart automatically. Once it's back online, you can confirm that your settings are now at their default values.
Return to Factory Defaults
In case your Holosun EPS Carry Red Dot isn't functioning as expected, a factory reset can often solve the issue. To initiate this process, first locate the minute button on the back of your optic. With your fingertip, {press and hold it for a duration of approximately 20 seconds. You'll observe an indication on the viewfinder that confirms the reset is in motion. Once complete, your Holosun EPS Carry Red Dot will be back to its original settings.